DTF PRESS INSTRUCTIONS

SET HEAT PRESS TO 300-325 DEGREES

PRE-PRESS GARMENT FOR 3-5 SECONDS

(TO REMOVE WRINKLES & MOISTURE) 

PRESS DTF FOR 15-20 SECONDS

COOL PEEL: WAIT 15/20SECONDS REPRESS FOR 5/8 SECONDS WITH PARCHMENT PAPER 

SINGLE COLOR PRESS INSTRUCTIONS

SET HEAT PRESS TO 325-350 DEGREES

 PRE-PRESS GARMENT FOR 3-5 SECONDS

(TO REMOVE WRINKLES & MOISTURE)

APPLY TRANSFER ON GARMENT & PRESS FOR 7-20 SECONDS

USE HEAVY PRESSURE, PEEL IMMEDIATELY

DO NOT USE TEFLON SHEET

CHENILLE PATCH PRESS INSTRUCTIONS

SET HEAT PRESS TO 375 DEGREES

PRE-PRESS GARMENT FOR 5-10 SECONDS TO REMOVE WRINKLES & MOISTURE

APPLY PATCH ON GARMENT & PRESS FOR 20 SECONDS, THEN FLIP GARMENT INSIDE OUT AND PRESS FOR AN ADDITIONAL 15-20 SECONDS

USE A COTTON CLOTH TO PLACE BETWEEN THE CHENILLE PATCH AND THE HEAT PRESS PLATE

COMMERCIAL PRESS ONLY!

SUBLIMATION PRESS INSTRUCTIONS

TUMBLER PRESS: PRESS FOR 50 SECONDS THEN ROTATE YOUR TUMBLER 180° & PRESS A SECOND TIME FOR ANOTHER 50 SECONDS

USING OVEN: IT’S SUGGESTED TO BAKE AT 365° FOR 6 MINUTES TURNING AFTER 3 MINUTES

UV DTF WRAPS & DECALS

1. Peel design transfer off of backing.

2. Place the transfer on the cup ensuring design is straight and positioned correctly.

(The adhesive is very strong. Once the transfer touches the glass it's impossible to take off)

3. Press the transfer down, working from the center outwards, pushing out any bubbles.

4. Rub all over the design with your fingers.  The more rubbing the better.

5. Peel clear film off and you're done!

Hand wash only.  We do not advise to put in dishwasher or microwave.

We are not responsible for application mishaps.

*Please note:  Not all brands of 16 oz. glass cups have the exact same measurements. They can differ by a couple of millimeters. Our wraps have been measured to fit Libbey glass cans. Adjustments may be necessary